|
|
|
| GUR® UHMW-PE
|
|
ultra high molecular weight polyethylene
GUR® ultra-high molecular weight polyethylene (UHMW-PE) is a linear polyethylene with a much higher molecular weight than standard PE, which offers outstanding abrasion resistance, superior impact resistance, non-sticking and self-lubricating properties, and excellent mechanical characteristics, even in cryogenic conditions.
Product Properties
Exceptionally high notched impact strength
High energy absorption capacity at high stress rate
Excellent wear-resistant properties
Low coefficient of friction
Very high chemical resistance to acids, alkalis and corrosive gases
Highly resistant to environmental stress cracking
Wide service temperature range from -200ºC to 90ºC
Grades
Orthopedic implants
Filtration
Batteries/lithium
Fibers
Additives
Membranes
Processing
Pressureless sintering
Ram extrusion
Compression molding
Injection molding
As a polyethylene with a very high molecular weight, GUR UHMW-PE is produced as a powder that requires special processing. In the semi-finished industry, the high pressures generated in compression molding and ram extrusion processes fuse the particles together. The material is then typically formed into stock shapes or profiles. It can also be processed by gelation and pressureless sintering.
GUR UHMW-PE premium grades for orthopedic implants and standard grades meet the requirements of heath organizations, such as the U.S. Food and Drug Administration (FDA) and European Union food-conformity. FDA Drug and Device Master Files are available for premium grades. |
|
| Related Products |
|  PEEK/PEK
Guangzhou Jingchang Engineering Materials Co., Ltd
Heat resistance :continuous operating temperature is 260 ,if reinforced with glass fiber or carbon fiber ,it can be reaching over 300
Mechanical performance ... | |  PTFE Product
Guangzhou Jingchang Engineering Materials Co., Ltd
1. Excellent resistance to chemicals.
2. Large temperature range from -200oC up to +250.
3. Anti-adhesive surface and low friction.
4. Pure PTFE ... | |  POM Product
Guangzhou Jingchang Engineering Materials Co., Ltd
1.Fatigue resistance and high strength.
2.Excellent abradability.
3.Low water absorption.
4.Hard surface with good rigidity.
5.Stable size, with ... | |  PPS Product
Guangzhou Jingchang Engineering Materials Co., Ltd
1.Excellent chemical resistance.
2.Low creep property.
3.Low water absorption.
4.Excellent stable size.
5.High elastic and excellent molding. ... | |  PEEK Product
Guangzhou Jingchang Engineering Materials Co., Ltd
1.Low creep property.
2.High elastic and excellent molding.
3.Excellent abradability and low friction.
4.Resistant to corrosion of various mediums. ... |
|
|
|
|
