|
|
|
| Altanium Matrix2™ temperature controller
|
|
Our ALTANIUM MATRIX2™ freestanding hot runner controller (and optional ULTRASYNC-E™ controller) provides accurate temperature control in a flexible, scalable modular design. ALTANIUM MATRIX2™ is ideal for medical and other applications where part quality is critical. ALTANIUM®''s Active Reasoning Technology (ART) optimizes thermal performance for each heater, which provides superior temperature control in each zone. ALTANIUM MATRIX2™ features a 19" touchscreen for an increased viewing and navigation experience, and includes multiple user selectable digital I/O signals as standard.
ALTANIUM MATRIX2™ features:
Power Deviation Alarm for plastic leak detection
Advanced Mold Diagnostics and troubleshooting
Process Data recording, including event logging
Unlimited mold set-up storage
Storage for images and documents
Multi role security
A variety of enclosures are available for the ALTANIUM MATRIX2™ controller.
Mold mount
Our mold mount enclosure allows the controller to be directly mounted to the mold, reducing the cost of cables and required floor space. Mold mount is patented technology that can be used on low and high cavitation hot runners and is controlled using a remotely mounted operator interface.
External machine mount
The external mold mount is attached to the exterior of the injection molding machine. This mount increases flexibility and floor space savings and is compatible with all ALTANIUM® controllers.
Free standing
Our free standing enclosures are compact and compatible with controllers up to 254 zones. These wheeled, mobile units can easily be moved for molding environments that need the flexibility of free moving equipment.
Technical Specifications
Operating Ambient Temperature:
32º to 104ºF (0º to 40ºC)
Storage Temperature:
-4º to 140ºF (-20º to 60ºC)
Humidity:
0 to 95% RH, non-condensing
Input Power:
1-Ph + E (3 wire) 200-240 VAC
3-Ph + E (4 wire) 200-240 VAC
3-Ph + N + E (5 wire) 380-415 VAC
Other voltages require an input supply transformer (Supply requirements for functional integrity 190 to 240 VAC)
Frequency Range:
50/60 Hz, +/- 5%
Measurement Accuracy:
±1.0ºF (0.5ºC) for the range 32ºF to 932ºF (0ºC to 500ºC)
Calibration:
Standard (using a NIST traceable thermocouple source)
Cold Junction Error:
±1.0ºF (0.5ºC) @ 77ºF (25ºC) typically
Temperature Stability:
±0.1ºF (0.05ºC) / ºF (ºC) from ambient
Control Stability:
±1 digit - under steady state conditions
Tuning Method:
Active Reasoning Technology (ART) or Manual PID control
Thermocouple Inputs:
Grounded or Ungrounded Type J standard (Type K optional)
- Sensor break and reverse detection
- Upscale failure mode
- High impedance input with zone to zone isolation
Heater Outputs:
- All zones rated at 240 VAC (Other Voltages Optional)
- 16 Amps per zone standard (20 or 30 Amps Optional)
- Short circuit protection for each zone (both legs fused)
Alarms:
Open Circuit Heater; Open Circuit Fuse(s); High and Low Temperature; Open, Shorted or Reversed Thermocouple(s) Ground Fault |
|
| Related Products |
|  UNIFY™ Pre-assembled Manifold System
Husky Injection Molding Systems Ltd.
Out of the crate, into the mold, and in production fast
Building on Husky's history of hot runner innovation, our new UNIFY™ manifold system ... | |  B-Series SCF Delivery System for Blow Molding Applications
Trexel, Inc.
The Trexel MuCell B-Series SCF (Super Critical Fluid) delivery system is a state of the art Nitrogen delivery and dosing system designed specifically ... | |  MuCell® Molding Technology
Trexel, Inc.
The most significant plastic processing
innovation in the last 20 years
The MuCell® microcellular foam injection molding process for thermoplastics ... | |  Altanium Matrix temperature controller
Husky Injection Molding Systems Ltd.
Our Altanium Matrix™ controller provides accurate temperature control in a flexible, modular design. Altanium Matrix is ideal for medical and other ... | |  IML
StackTeck Inc.
Injection molded in mold labeled products have expanded rapidly to new market applications with 1-, 3- and 5-sided and wrap-around applications for event ... |
|
|
|
|
