|
|
| 60W laser power supply
|
|
The power supply adopts zero-current half-bridge soft switching circuit, featurin high efficiency, fast response and easy matching for laser tubes produced by various manufacturers. Its ports can be controlled simply to adapt to high and low level signals; the switch of the laser can be controlled by TTL electrical level. Meanwhile, it has an additional abnormal protection switch to test external water supply, ventilation, etc.
The laser power can be adjusted by entering either 0 to 5V analog signals or PWM signals.
The power supply has open circuit protection function: under the well-grounding circumstances, it can work under open circuit state within short term to avoid laser power supply damages caused by laser tube burst.
Ex-factory Aging Test:
Each power supply should go through 12-hour, 60??? high temperature aging test under full load with 500 times power supply switch in 7 seconds.
Main Technical Parameters:
AC Input Voltage AC220V or AC110V
DC Input Voltage DC300V or DC150V
AC Input Frequency 47~440Hz
Voltage Output 50KV
Maximum Current 38mA (depending on the laser tubes of different manufacturers)
Efficiency 91%
Overcurrent Protection 130% of maximum current
Open Circuit Protection Yes(short term)
Structure Fan cooling
High Electric Level Control Voltage Range ???3V
Low Electric Level Control Voltage Range <=0.8V
Working Temperature -30???~+65???
Relative Humidity 20~85%RH(no condensation)
Voltage Resistance Input - Output AC1500V1minutes<=10mA
Input - Shell AC1500V1 minutes<=10mA
Output - Shell Connection
Insulation Resistance ???50M?(DC500V)
Earth Leakage Current <=1mA(AC220V)<=0.5 mA(AC110V)
Vibration Resistance Amplitude: 0.5mm frequency 10~55Hz 3D direction 2 hours
MTBF ???30,000hours
Test Time at Full Load and 60??? 12 hours
Power Supply Switch Test within 7 Seconds 500 times
Maximum Dimensions (L*W*H) 350mm*220mm*95mm
|
|
|
|
|
